VIEWING IMAGES ON A COMPUTER
163
7.
Turn on the camera, and then press [MENU].
• It makes no difference whether the camera is in the
REC mode or PLAY mode.
8.
Select the “Set Up” tab, select “USB”, and
then press [].
9
.
Use [] and [] to select “Mass Storage (USB
DIRECT-PRINT)”, and then press [SET].
Connector (Mini-B)
10.
Turn off the camera, and connect the USB
cable that comes bundled with the camera to
the camera and your computer’s USB port.
USB
USB port
Connector (A)
USB cable
(bundled)
[USB]
• Take care when connecting the USB cable to the
camera or your computer. USB ports and cable plugs
are shaped for proper positioning.
• Plug the USB cable plugs into the ports securely, as
far as they will go. Proper operation is not possible if
connections are not correct.
To Next Page
Loading...
Need help?
General
