Casio QW-5311 - 7 Applying Silicon Oil to the Crown Pipe; Applying Silicon Oil

QW-5311
–18–18––
7. APPLYING SILICON OIL TO THE CROWN PIPE
AfterreplacingtheCenterASS’Yorsettingstem,besuretoapplysiliconoil.
NosiliconoilisappliedtotheCenterASS’Yandthesettingstemwhicharesuppliedasspareparts.
7-1. APPLYING SILICON OIL
ApplyanadequateamountofsiliconoiltotheO-ringofthecrownpipebyusingathinsticksuchasa
toothpickorbambooskewer.
3 H
Side View
Crown pipe ass'y
Setting stem
O-ring
O-ring
O-ring
Toothpickwithsiliconoil
Cautions concerning Assembling
* Useonlyanadequateamountofsiliconoilsothattheoildoesnotowoutofthecrownpipewhen
attachingthesettingstem.
* KeeptheO-ringfreeofdebrisordust.