Casio QW-5311 - Checking the Model

QW-5311
– 20 –
8-2. CHECKING THE MODEL
25-sec. position
5-sec. position
SPEC 1
HOME CITY CURRENTLY SET
RECEIVING SIGNAL CHECK
PULSE CONTROL TEST
MODEL CHECKING MODE

ACCURACY
CHECKING


No test is performed 1
No test is performed 2

or SR pull/push*
35-sec. position
AGING TEST
AGING MODE


or SR
pull/push*
10-sec. position
CONFIGURING HOME CITY MODE



or SR
pull/push*

+

× 2
Any Button or
SR pull/push*

,

or
SR pull/push*
15-sec. position
BRIGHTNESS DETERMINATION
TIME CALIBRATION SIGNAL TEST MODE



or SR
pull/push*
20-sec. position
SOLAR CELL-PCB ASS’Y CONTACT CHECKING MODE



or SR
pull/push*

or SR
pull/push*
30-sec. position


or SR
pull/push*

45-sec. position No test is performed 3


or SR
pull/push*
Any Button or
SR pull/push*
Any Button or
SR pull/push*
35-sec. position
40-sec. position
CHECKING THE HAND OPERATION MODE


or SR
pull/push*


+

or
SR pull/push*
Crown
Timekeeping mode
* “SR pull/push" in the test mode means pulling out the crown and then pressing it back in.

or
SR pull/push*
SPEC 2

or


