Casio SI-460

40 41
TELEPHONE
OPERATION
TELEPHONE
OPERATION
TELEPHONE OPERATION
DIALING STORED AUTODIAL NUMBERS
1.Pick up the handset.
2.Press the AUTODIAL STATION key of the number you want to speed dial.
3.The SI-460 will automatically dial the number displayed.
4.To hang up, return the handset to the cradle.
STORING A SCRATCH PAD NUMBER
While on-hook or off-hook, the scratch pad is a location where you can temporarily store a
number. The number you enter into the scratch pad will remain there until another number is
entered.
To store a number in scratch pad memory.
1.Press
SCRATCH PAD
. “SCRATCH PAD” will appear in the display.
2.Enter the number you want to temporarily store in this location, using the keypad.
3.Press
SCRATCH PAD
again. The unit will beep to indicate the number entered has been saved and
the LCD will return to the standby display.
DIALING A SCRATCH PAD NUMBER
To dial a number stored in the scratch pad memory,
1.Lift the handset.
2.Press
SCRATCH PAD
.
3.Press
DIAL
.
4.The number will automatically be dialed.
DISPLAY AND DIAL NUMBER
To display a number prior to dialing the number,
1.Use the keypad to dial a number.
2.The telephone number will appear in the display as it is entered.
3.Lift the handset.
4.Press
DIAL
to dial the displayed number.
AUTO BUSY REDIAL
Auto busy redial automatically redials a busy line up to 10 times, at 20 second intervals. If the
line is still busy after ten attempts, the SI-460 will return to the idle mode. Automatic busy redial
can be canceled anytime by pressing
REDIAL
AUTO REDIA
L
again.
Once you get a busy signal:
1.Hang up.
2.Press
REDIAL
AUTO REDIA
L
twice. The SPEAKERPHONE INDICATOR will rapidly flash and the unit will
attempt to redial the number.
3.The unit will pause 7 seconds between redial attempts and the SPEAKERPHONE INDICATOR
will slowly flash.
4.The unit will redial the busy line up to 10 times or until the call is answered.
5. Pick up the handset or speak into the hands-free microphone to answer the call.
6.Return the handset to the cradle or press
F
U
L
L
D
U
P
L
E
X
SPEAKER
to end the call.
NO ANSWER REDIAL
No answer redial automatically redials an unanswered line up to 10 times, at 20 second intervals.
If no one answers the line after ten attempts, the SI-460 will return to the idle mode. Automatic
no answer redial can be canceled anytime by pressing
REDIAL
AUTO REDIA
L
again.
Once you make a call where no one answers:
1.Hang up.
2.Press
REDIAL
AUTO REDIA
L
twice. The SPEAKERPHONE INDICATOR will rapidly flash and the unit will
attempt to redial the number.
3.The unit will pause 7 seconds between redial attempts and the SPEAKERPHONE INDICATOR
will slowly flash.
4.The unit will redial the unanswered line up to 10 times or until the call is answered.
5.Press
F
U
L
L
D
U
P
L
E
X
SPEAKER
to end the auto redial and begin speaking.
6.Return the handset to the cradle or press
F
U
L
L
D
U
P
L
E
X
SPEAKER
to end the call.
REVIEWING AUTODIAL ENTRIES
To review stored autodial entries,
1. Press an AUTODIAL STATION key.
2.The name and/or number programmed in the chosen autodial location will appear on the
display. The screen will return to the default screen after thirty seconds.
TELEPHONE OPERATION
MEMORY STORAGE (cont.) MEMORY STORAGE (cont.)