Casio SI-460

14 15
SET STATION 11
BACK CHANGE SAVE
2.
3.
4.
PROGRAMMING THE TELEPHONE
The SI-460 can be customized to meet your needs.
ASSIGNING A STATION EXTENSION NUMBER
1.Press
PROGRAM
.
5.
NOTE:
■ If another station’s ID number is chosen, an error
beep will be heard and “NOT AVAIL” will appear in
the display. Press the soft key under “CHANGE to
select another extension number.
6.
7.
Press
PROGRAM
to exit.
The LCD displays the time and day and a synthesized voice announces the time and day a
message was received, prior to a message being playbacked.
SETTING THE TIME AND DATE
1.Press
PROGRAM
.
2.
3.
4.
5.
“TIME (HH:MM)” will appear in the
display. Use the keypad to enter the hour
(01-12) and minutes (00-59).
PLEASE SELECT
PHON ANSW OTHER
AUTO ATTND:OFF
BACK CHANGE NEXT
TIME&DAY SETUP
BACK ENTER NEXT
TIME (HH:MM)
BACK SAVE NEXT
1/01 12:57
AM
6.
Your entries will appear in the display as
they are typed. If the time entry is
incorrect, press the soft key under “BACK”
to re-enter the time.
PLEASE SELECT
PHON ANSW OTHER
CALLER ID ON
BACK CHANGE NEXT
Press “CHANGE” until the chosen
extension number (11-22) appears in
the display.
SET STATION ID
BACK ENTER NEXT
SET STATION 11
BACK CHANGE SAVE
PROGRAMMING
CONTINUED NEXT PAGE
Each station must have a different extension number assigned.
TIME (HH:MM)
BACK SAVE NEXT
1/01 12:57
AM
7.
The programmed time will then appear in
the display.
RINGER SELECT
BACK ENTER NEXT
AUTODIAL SETUP
BACK ENTER NEXT
FLASH: 600 MS
BACK CHANGE NEXT
DAY: SUNDAY
BACK CHANGE NEXT
DATE (MM:DD)
BACK SAVE NEXT
AM/PM
BACK CHANGE NEXT
1/01 12:57
PM
8.
PROGRAMMING THE TELEPHONE
SETTING THE TIME AND DATE (cont.)
13.
11.
“DATE (MM/DD)” will appear in the
display. Use the keypad to enter the
month (01-12) and the day (01-31). To
edit your entry, press the soft key under
“BACK” to re-enter the date.
DATE (MM:DD)
BACK SAVE NEXT
4/ 16 12:57
PM
9. Press the soft key under “CHANGE” to
toggle between “AM” and “PM.”
10.
TIME (HH:MM)
BACK SAVE NEXT
1/01 12:57
AM
12.
6.
Press the soft key under “CHANGE” to
toggle between “ON” and “OFF.”
14.
Press the soft key under “CHANGE” until
the correct week day appears in the
display.
15.
16.
Press
PROGRAM
to exit.
SETTING AUTOMATIC ANSWER
When auto answer is turned on and a station receives an intercom call, the station does not
intercom ring, instead, the speakerphone automatically answers the intercom call.
To program the auto answer feature,
PLEASE SELECT
PHON ANSW OTHER
AUTOANSWER: ON
BACK CHANGE NEXT
7.Once your selection appears in the display,
press
PROGRAM
to exit.
DAY: MONDAY
BACK CHANGE NEXT
1.Press
PROGRAM
.
PROGRAMMING
2.
3.
4.
5.