Casio SI-460

48 49
ANSWERING SYSTEM
MESSAGE RETRIEVAL (cont.)
SKIP FORWARD
Skip forward through messages during playback.
1.Press
SKIP
to forward to the next message.
2.The message number, day and time will be replayed with the message.
PAUSE MESSAGE PLAYBACK
You can temporarily pause message playback for up to five minutes.
1.Press
PLAY ALL
or
PLAY NEW
during message playback.
2.“PAUSE” will appear in the display and message playback will stop. If you do not resume
message playback in five minutes pause and message playback will end. All messages will be
saved.
3.Resume message playback by pressing
PLAY ALL
or
PLAY NEW
. In the display, “PAUSE” will be
replaced by the caller ID record of the message playing.
VARIABLE SPEED PLAYBACK
TM
Variable Speed Playback
TM
allows you to play your messages 50% faster or 50% slower. You can
switch between normal, slow and fast playback speeds. The pitch of the caller’s voice remains
unchanged.
Slow Playback: During message playback, press
once. The message playing will play
50% slower than normal.
Fast Playback: During message playback, press
VSP FAST
once. The message playing will play
50% faster than normal.
Resume Normal Playback:
To return to normal playback speed, from fast playback, press
once.
To return to normal playback from slow playback, press
VSP FAST
once.
ANSWERING SYSTEM
LINKED CALLER ID RECORD TO MESSAGE
When scrolling through caller ID records, if an * follows a caller ID record, this indicates that a
message has been received from this caller.
When the caller ID record with the
* is on the display, make sure voice mail is on.
1.Press
PLAY ALL
to hear the attached message. The message number, day and time will be
announced before the message is played.
PLAY ALL MESSAGES
Messages will be played over the speaker. However, you can lift the handset or press
HEADSET
ANSWER
MESSAGE RETRIEVAL (cont.)
ANSWERING
SYSTEM
ANSWERING
SYSTEM
to listen to messages privately.
To play all saved and new messages,
1.Press
PLAY ALL
.
2.You will either hear “I will play messages” or “You have no messages.”
3.All messages will play in the order received. The message number, time and day will be
announced before each message.
4.After the end of the last message is played, “End of messages” will be announced.
REPEAT MESSAGE
During message playback, you can repeat a message by,
1.Pressing
REPEAT
.
2.The message number, day and time of the last message played will be replayed with the
message.
SKIP BACKWARD
Skip backward, message by message during message playback.
1.Press
REPEAT
twice to skip back to the previous message.
2.The message number, day and time will be replayed with the message.