12
Using a Projector Built-in SSID (Simple or Generic) to Establish
a Wireless LAN Connection
This section explains how to use Network Connection to search for a projector built-in SSID (simple or
generic) and establish a wireless LAN connection between the projector and computer. The
operations described here establish a wireless LAN connection between the projector and computer
and start projection of the computer screen.
To use a projector simple connection SSID to establish a
wireless LAN connection and project
Projector Operation
1.
Connect the wireless adapter to the projector (page 10) and then turn on the
projector.
z The input source will automatically switch to “Network” and projection of the LAN connection
standby screen will start.
z If projection of the LAN connection standby screen does not start, press the [INPUT] key. On
the “Input” dialog box that appears, use the [T] and [S] keys to select “Network” and then
press the [ENTER] key.
2.
Press the [MENU] key and then select the following: “Network Settings” 3
“Projector Wireless LAN Settings” 3 “SSID”. On the dialog box that appears,
select one of the following: casiolpj0001, casiolpj0002, casiolpj0003, or
casiolpj0004.
3.
Press the [ESC] key twice to return to “Network Settings”.
4.
Use the [T] key to select “Update Network Settings” and then press the [ENTER]
key.
z This will display a confirmation dialog box asking if you want to update network settings.
5.
Press the [S] key to select “Yes”, and then press the [ENTER] key.
z This applies the SSID change to the projector and closes the dialog box. Wait until the LAN
connection standby screen starts to be projected again.
z If multiple projectors are in use nearby, select a separate SSID for each projector.
Wireless LAN connection
To Next Page
Loading...
Need help?
General
Weight and Dimensions
