Casio XJ-UT310WN - To Log in to the Transfer File Page over a Wired LAN Connection; To Log out from the Transfer File Page; To Change the Password for Logging in to the Transfer File Page

69
To log in to the Transfer File page over a wired LAN connection
See “To log in to the Projector Admin pages over a wired LAN connection” (page 54).
In step 6 of the procedure, click “Transfer File” instead of “Projector Admin”. Note that the initial
default password is “admin”.
To log out from the Transfer File page
In the upper right corner of the web browser window, click “Logout”.
This returns to the projector top page.
To change the password for logging in to the Transfer File page
Important!
z Projector Admin page login privileges are required to perform the procedure below.
1. Referring to “Logging In to the Projector Admin Pages over a Wireless LAN
Connection” (page 53), log in to the Projector Admin pages.
2. On the left pane, click “Change Passwords”.
z This will display the “Change Passwords” page.
3. Under “Transfer File”, input up to eight single-byte characters for the new
password into both “New Password” and “Reinput Password”. Input the same
password into both boxes.
4. Click [Apply].
5. To log out from the Projector Admin pages, click “Logout”.