To Next PageTo Next PageWhat to do if files are missing from the internal memory file list on the Casio XJ-UT310WN?
If files are missing from the internal memory file list, exit File Viewer on the projector. Turn the projector off and then back on again. Then, start up File Viewer and display the list of files in internal memory.
What to do if the network connection was lost while the Transfer File page was displayed on Casio Projector?
If the network connection was lost and the file list is blank, exit the web browser you are using to display the Transfer File page, and then log in to the Transfer File page over a wireless LAN connection or a wired LAN connection again.
What causes wireless LAN connection problems when multiple Casio projectors are used at the same time?
Wireless LAN connection problems with multiple projectors may occur if more than one projector is assigned the same SSID number. Check your settings to ensure each projector has a unique SSID.
How to fix Casio Projector when File Viewer does not appear after connecting USB?
If the File Viewer on your Casio Projector doesn't display a connected USB flash drive, the drive might be formatted in a way the projector can't recognize. Use your computer to check if the file system is FAT or FAT32. If it's not, reformat the USB flash drive to FAT or FAT32. Also, check the 'Plug and Play' setting under 'Option Settings 2' and make sure it's set to 'On'.
Why some folders and files are not displayed in the file menu of Casio Projector?
If your Casio Projector doesn't display all folders or files in the file menu, it might be because there are too many items in a single folder. If a folder contains more than 999 folders or files, the projector won't display all of them. To fix this, reduce the number of folders and files within that folder.
Why is the file name shorter after uploading to the Casio XJ-UT310WN?
The projector’s File Viewer can display up to 38 single-byte characters for a file name. Ensure the file name has no more than 38 characters.
What to do if I can’t establish a wireless LAN connection between my Casio Projector and a computer?
If you're having trouble establishing a wireless LAN connection, first ensure that any other wireless LAN utilities besides Network Connection are closed on your computer. Then, try moving the projector closer to the computer, making sure there are no obstructions between them. Relocate any nearby microwave ovens, Bluetooth devices, or other devices that might be interfering with the signal. Also, ensure the projector is turned on, the wireless adapter is connected (if applicable), and the computer’s wireless LAN function is enabled.
What to do if Casio XJ-UT310WN admin pages do not appear from Network Connection?
If the Projector Admin pages are not appearing, it could be due to your browser being configured to use a proxy server. You should change your browser configuration.
Why Casio XJ-UT310WN says this movie file cannot be played back?
If your Casio Projector cannot play back a movie file, it might be due to the file having an unsupported format or size. Also, there may be an error in the movie file itself, so open the movie file on your computer and check it.
What to do if Casio Projector says this ECA/PtG file cannot be played back?
If your Casio Projector displays an error message indicating that an ECA/PtG file cannot be played back, there may be an error in the ECA file or PtG file itself. Try playing back the ECA file or PtG file using the EZ-Converter FA on your computer to check it.
General| Matrix size | 0.65 \ |
|---|---|
| Matrix type | 3-panel (p-Si TFT active) |
| Number of colors | 16.78 million colors |
| Native aspect ratio | 16:10 |
| Projection distance | - m |
| Projection technology | DLP |
| Supported aspect ratios | 16:9, 16:10 |
| Contrast ratio (typical) | 1800:1 |
| Screen size compatibility | 50 - 110 \ |
| Projector native resolution | WXGA (1280x800) |
| Keystone correction, horizontal | -5 - 5 ° |
| Focus | Manual |
| Offset | 118 % |
| Throw ratio | 0.28:1 |
| Focal length range | - mm |
| Light source type | Laser/LED hybrid |
| Service life of light source | 20000 h |
| Full HD | No |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| Analog signal format system | NTSC, PAL, PAL 60, PAL M, PAL N, SECAM |
| Microphone in | Yes |
| Audio (L/R) in | 2 |
| USB connector type | USB Type-A, USB Type-B |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| VGA (D-Sub) ports quantity | 3 |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Noise level | 34 dB |
| Noise level (economic mode) | 29 dB |
| RMS rated power | 16 W |
| Placement | Desktop, Ceiling |
| Product type | Ultra short throw projector |
| Product color | Grey, White |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.4 W |
| Power consumption (typical) | 230 W |
| Operating altitude | 0 - 3000 m |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
Weight and Dimensions| Depth | 332 mm |
|---|---|
| Width | 414 mm |
| Height | 152.4 mm |
| Weight | 5500 g |
| Package depth | 470 mm |
| Package width | 594 mm |
| Package height | 274 mm |
| Package weight | 9620 g |
Initial projector setup, safety precautions, and cable connections.
Using the remote controller, including battery installation.
How to choose and configure different input sources for projection.
Procedures for entering and using the 3D input mode.
Guide to projecting various file types using the projector's File Viewer.
Projecting computer screen content via USB connection.
Connecting and projecting the screen of a CASIO graphing calculator.
Controls for zoom, volume, brightness, color, and aspect ratio.
Configuring Eco Mode, Presentation Timer, and Setup Menu.
Digital screen shift, password protection, and control panel lock.
Interpreting indicator lights and resolving error messages.
Instructions for connecting component, composite, and S-video sources.
Monitor OUT, firmware updates, RS-232C control, and command lists.
