To Next PageTo Next PageWhy Casio XJ-UT310WN says this movie file cannot be played back?
If your Casio Projector cannot play back a movie file, it might be due to the file having an unsupported format or size. Also, there may be an error in the movie file itself, so open the movie file on your computer and check it.
What to do if I can establish a wireless LAN connection between my Casio XJ-UT310WN Projector and computer, but the computer screen contents won’t project?
If you can connect wirelessly but the screen isn't projecting, ensure that 'Network' is selected as the projector’s input source by pressing the [INPUT] key. If 'Network' is already selected, click (Project 1 screen) on the Network Connection window. Also, if the image has been frozen or blanked, press the [ESC] key on the remote to cancel the freeze/blank operation.
What to do if Casio Projector says this ECA/PtG file cannot be played back?
If your Casio Projector displays an error message indicating that an ECA/PtG file cannot be played back, there may be an error in the ECA file or PtG file itself. Try playing back the ECA file or PtG file using the EZ-Converter FA on your computer to check it.
Why does Casio XJ-UT310WN Projector say folder does not contain any image files?
If your Casio Projector indicates that a folder doesn't contain any image files, use your computer to check the contents of the folder. The File Viewer may not be able to access the folder or files within it.
Why question marks appear instead of thumbnails on Casio Projector?
If you see question marks instead of thumbnails in the Slide Mode file menu of your Casio Projector, it means the images can't be projected by the File Viewer.
Why Casio Projector doesn't show digital camera memory contents via USB?
If your Casio Projector isn't displaying the contents of your digital camera's memory when connected via USB, consult your digital camera's user documentation for information about the required settings and operations. It's possible the camera's USB mass storage class setting isn't configured correctly or that you need to perform a specific action on the camera. Also, your camera may not support USB mass storage class, and if it doesn't, you won't be able to view the contents.
What to do if Casio Projector doesn't recognize all devices connected via USB hub?
If your Casio Projector isn't recognizing all connected devices via a USB hub or card reader, it's because the projector can only recognize up to four drives. Ensure that you connect no more than four memory devices at a time.
Why some folders and files are not displayed in the file menu of Casio Projector?
If your Casio Projector doesn't display all folders or files in the file menu, it might be because there are too many items in a single folder. If a folder contains more than 999 folders or files, the projector won't display all of them. To fix this, reduce the number of folders and files within that folder.
How to fix Casio Projector when File Viewer does not appear after connecting USB?
If the File Viewer on your Casio Projector doesn't display a connected USB flash drive, the drive might be formatted in a way the projector can't recognize. Use your computer to check if the file system is FAT or FAT32. If it's not, reformat the USB flash drive to FAT or FAT32. Also, check the 'Plug and Play' setting under 'Option Settings 2' and make sure it's set to 'On'.
What causes wireless LAN connection problems when multiple Casio projectors are used at the same time?
Wireless LAN connection problems with multiple projectors may occur if more than one projector is assigned the same SSID number. Check your settings to ensure each projector has a unique SSID.
General| Matrix size | 0.65 \ |
|---|---|
| Matrix type | 3-panel (p-Si TFT active) |
| Number of colors | 16.78 million colors |
| Native aspect ratio | 16:10 |
| Projection distance | - m |
| Projection technology | DLP |
| Supported aspect ratios | 16:9, 16:10 |
| Contrast ratio (typical) | 1800:1 |
| Screen size compatibility | 50 - 110 \ |
| Projector native resolution | WXGA (1280x800) |
| Keystone correction, horizontal | -5 - 5 ° |
| Focus | Manual |
| Offset | 118 % |
| Throw ratio | 0.28:1 |
| Focal length range | - mm |
| Light source type | Laser/LED hybrid |
| Service life of light source | 20000 h |
| Full HD | No |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| Analog signal format system | NTSC, PAL, PAL 60, PAL M, PAL N, SECAM |
| Microphone in | Yes |
| Audio (L/R) in | 2 |
| USB connector type | USB Type-A, USB Type-B |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| VGA (D-Sub) ports quantity | 3 |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Noise level | 34 dB |
| Noise level (economic mode) | 29 dB |
| RMS rated power | 16 W |
| Placement | Desktop, Ceiling |
| Product type | Ultra short throw projector |
| Product color | Grey, White |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.4 W |
| Power consumption (typical) | 230 W |
| Operating altitude | 0 - 3000 m |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
Weight and Dimensions| Depth | 332 mm |
|---|---|
| Width | 414 mm |
| Height | 152.4 mm |
| Weight | 5500 g |
| Package depth | 470 mm |
| Package width | 594 mm |
| Package height | 274 mm |
| Package weight | 9620 g |
Initial projector setup, safety precautions, and cable connections.
Using the remote controller, including battery installation.
How to choose and configure different input sources for projection.
Procedures for entering and using the 3D input mode.
Guide to projecting various file types using the projector's File Viewer.
Projecting computer screen content via USB connection.
Connecting and projecting the screen of a CASIO graphing calculator.
Controls for zoom, volume, brightness, color, and aspect ratio.
Configuring Eco Mode, Presentation Timer, and Setup Menu.
Digital screen shift, password protection, and control panel lock.
Interpreting indicator lights and resolving error messages.
Instructions for connecting component, composite, and S-video sources.
Monitor OUT, firmware updates, RS-232C control, and command lists.
