20
Starting Projection of Files Located in Projector Internal
Memory
1.
If a USB flash drive or some other USB device is connected to the projector’s
USB-A port, disconnect it.
2.
Press the [INPUT] key. This will display the “Input” dialog box.
3.
Use the [T] and [S] keys to select “Viewer” and then press the [ENTER] key.
4.
On the dialog box that appears, confirm that “File Viewer” is selected and then
press the [ENTER] key.
z This will start up File Viewer and display the File Viewer main screen like the one shown below.
5.
Depending on the type of file you want to project, perform one of the operations
below.
To project this type of file: Perform this operation:
Presentation Files “To project a presentation file” (page 25)
PDF Files “To project a PDF file” (page 26)
Image Files “To project an image file” (page 27)
Movie Files “To project a movie file” (page 27)
To Next Page
Loading...
