16
Computer Operation
6.
Start up Network Connection.
z The Network Connection window will appear with the message “Connecting”.
z If your computer is running Windows 7, 8 or 8.1 and the “Set Network Location” dialog box
appears, click [Cancel] to close the dialog box.
z One of the dialog boxes shown below will appear as soon as Network Connection finds the
projector to connect with.
7.
Click the SSID of the projector you want to connect with, and then click [OK].
If this dialog box appears: It indicates this status: Advance to this step:
“Projector List” Multiple connectable projectors were
detected.
Step 7
“Enter the passphrase or WEP key.” Only one connectable projector was
detected.
Step 8
To Next Page
Loading...
