Cassida Cube - Getting Started

Cassida Cube compact value counter
GETTING STARTED
2.
2.1 Open the stacker assembly
3. Open
4. Extend bill pressing wire guide to its full length
USD=Narrowest setting
Unfold from bottom rear
(for best performance)
1. Open
1. Open
2. Extend to line on label
NOTE: For optimal counting of US currency, the hopper guide should extend no
farther than 16.5 cm (approximately 6.5 inches) from the edge f the Cube. The
bill pressing wire should be extended to its full length. Please follow guidelines
shownontheafxedstickers.
7