Cassida Cube - Loading Bills

Moving money forward
®
10
LOADING BILLS
3.
Placethemachineonaatsurface,thenopenthetiltstand,ensuringthatno
strongelectromagneticelds,brightlightorsunshinearecontactingtheCube.
Plug the electric socket into AC electric source. If you have purchased an external
display, connect it to the external display interface on the back of the counter.
Press
CUR
Switches between counting currency USD
and Free (for counting coupons or checks)
MODE
Switches between Mix and Sort
ADD
Turns ADD mode on or off
BAT
Cycles through the batch amounts
( 100 / 50 / 25 / 20 / 10 )
+
1/
+
10
Increases batch amounts by 1 or
(press and hold)
10
CLR
Clears the batch amount
PRT
Prints a report (with optional printer)
REP
Displays an on-screen report
MENU
Accesses settings
(Time Set, Auto-Start, and Sleep Time)
Powers the Cube on or off (Press and hold)
START
Starts or continues the count
for 2 seconds, machine will perform a self-test (see Figure 3-1).
If the self-test is successful, the machine will enter into ready state (see Figure 3-2),
if some error messages are displayed, please deal with them according to the
Troubleshooting in the manual. See section 6.
Low Battery
Figure 3-1
Figure 4-1 Figure 4-2
Figure 3-2
Print...
Ver. 2.10
Self-Test
USD
ADD
PCS:
VAL:
$
0
0
A Bat:---
Mix
Auto mode
USD
ADD
PCS:
VAL:
$
0
0
A Bat:---
Mix
USD
ADD
PCS:
VAL:
$
0
0
M Bat:---
Mix
Total
Value
Total
Number
Denomination Piece Value
USD
ADD
PCS:
VAL:
$
10
1000
M B:---
Mix
Piece
PCS:
0
A Bat:---
Count
Time Set
Auto : ON
Sleep Time : 10M
To Select : CUR
To Change : ADD
21:06 2014-04-03
Manual mode
USD
ADD
PCS:
VAL:
$
999
999999
A Bat:---
Mix USD
ADD
PCS:
VAL:
$
0
0
M Bat:---
Mix
215
100
50
20
20
25
0
10
1
1
1
2
5
0 0
0
Total
100
50
20
10
5
2
1
Plug in
USD
ADD
PCS:
VAL:
$
35
175
A Bat:---
Mix USD
ADD
PCS:
VAL:
$
59
384
A Bat:---
Mix
It is very important to place the bills into the hopper correctly, because recognition
performance of the bills is highly affected by the arrangement of the bills. Bills
should be placed in a neat stack prior to being placed into the hopper. Please
avoid counting bills that are wet, excessively dirty, spoiled, folded, curled or with
foreign material like clips, bands, etc. It will damage and cause malfunction of
the machine.