Cassida Cube compact value counter
Arrange a stack of bills with smaller denominations in the middle, where possible.
Then set the hopper guide to the position where it just touches the edges of the
bills.WhilestandinginfrontoftheCube, laythebillsatlyonthehopper.The
Cube will begin counting automatically.
When a suspicious bill is detected, the counter will stop immediately and the
machine will emit a beep. The top bill in the stacker is a suspect bill. Remove the
top bill, press
CUR
Switches between counting currency
USD
and
Free
(for counting coupons or checks)
MODE
Switches between
Mix
and
Sort
ADD
Turns
ADD
mode on or off
BAT
Cycles through the batch amounts
(
100
/
50
/
25
/
20
/
10
)
+
1/
+
10
Increases batch amounts by
1
or
(press and hold)
10
CLR
Clears the batch amount
PRT
Prints a report (with optional printer)
REP
Displays an on-screen report
MENU
Accesses settings
(Time Set, Auto-Start, and Sleep Time)
Powers the Cube on or off (Press and hold)
Starts or continues the count
and the machine will continue counting.
NOTE: Certain errors, such as double notes, chain notes and passing errors will
cause the Cube to stop automatically. If this occurs, please recount all bills in
the stack
11