Moving money forward
®
3.1 Counting coins in cups from your till
The TillTally includes a coin cup. Place the empty cup onto
the scale’s cup support tray. Assure the coin symbol is shown
on screen. Next, place loose coins of a single denomination
directly into the cup. The denomination placed into the cup
should match the shown on screen. Change the denomination
by pushing the , or > button.
Once the TillTally registers the count and value of the denomination, remove the
cup from the hod and empty it.
Return the cup to the scale and place the next denomination into the cup. Do
the same for all coins.
If you have forgotten coinage and need to add to a denomination, simply
choose the denomination by pushing the < or> button.
Ifyourtillorregisterhasremovablecups,youcanplacethelledcupsdirectly
on the scale. A prior calibration of the cups is required before using your own
cups.Seesection5.4.Placethelledcupsdirectlyonthecupsupport.
NOTE: The TillTally can calibrate and store the weight for a single cup. The TillTally
Elite has the ability to calibrate and store the weight for up to 8 different cups.
NOTE: Do not overll the cups. The TillTally can weigh up to 1kg before
overweighing.
8
To Next Page
Loading...
Need help?
General
