Cassida TillTally - Order; Set Cup Weight

Moving money forward
®
5.3 Order
This function allows you to count up from pennies to larger bills (ascending) or
down from larger bills to pennies (descending) ASCENDING is the default setting
for the TillTally Elite. To change or congure ORDER, press OK when ORDER is
shown in the SETUP menu. Press < or > to choose ASCENDING or DESCENDING.
PressOKtoconrmyourchoice.
To continue with SETUP menus, press < or >. To exit the ORDER setup menu, press
CLEAR.
5.4 Set Cup Weight
This function allows you to set the weight for the TillTally counting cup and/or
the cups from your register. The TillTally Elite allows can store the weights of up
to8cups.TochangeorcongureSETCUPWEIGHT,pressOKwhenSETCUPWTis
shown in the SETUP menu.
TillTally: The scale will prompt you to PLACE CUP. Place the cup on the cup
support hod. Press OK to save cup. Choose < or > to continue scrolling through
SETUP menus. To exit the SET CUP WEIGHT setup menu, press CLEAR.
TillTally Elite: The scale will prompt you to CHOOSE CUP. Press OK to choose ALL
cups. Use this function if all of your cups are exactly the same weight. Or press <
or>toweighaspeciccup(CUP1,CUP2…CUP8).PressOK.TheScaleprompts
you to PLACE CUP. Place the cup on the support hod. Press OK to save cup.
Choose < or > to continue scrolling through SETUP menus. To set the cup weight
of an additional cup, you’ll need to repeat this CHOOSE CUP process.
To continue with SETUP menus, press < or >. To exit the SET CUP WEIGHT set up
menu, press CLEAR.
16