230 Series Auger Packer
42 OF 115
WARNING: Maintenance must be performed ONLY by qualified technicians, with the
power supply disconnected.
GENERAL MAINTENANCE
The CBE 230 is designed to be operated and maintained by the user. It is suggested that operation and
maintenance personnel study and thoroughly understand the function and working relationship of each
part before any adjustment, maintenance, or troubleshooting is performed. The following
recommendations are based on general observations made in our factory and at various installations.
These recommendations may need to be adapted to suit your operating conditions. For this reason, we
recommend you keep a detailed log recording all maintenance, adjustments, replaced parts and
malfunctions. These records will assist in several ways; they will show which parts most often have to be
worked on or replaced. The log should be reviewed weekly and used to set up a preventative
maintenance program. Keeping the system clean and well lubricated is most important to insure
maximum performance and service life of the equipment. Lubrication charts and maintenance guides
are provided on the following pages for your assistance. Only qualified maintenance personnel should
work on this equipment. Before attempting any maintenance be sure to read the Important Notice
section at the beginning of this manual regarding safety precautions.
WARNING: Always disconnect electrical and pneumatic utilities when servicing
related components.
For equipment not manufactured by Choice Bagging Equipment, Ltd see appropriate Manufacturer’s
Bulletin.
To Next Page
Loading...
