230 Series Auger Packer
7 OF 115
Do not attempt to defeat any safety switches. Serious injury could result.
While machine control power is on, do not activate limit switches manually. Serious injury and/or
machine damage could result. Disable machine before attempting any maintenance or manual testing of
components.
Motors will get warm to the touch and should not cause concern for equipment reliability and operation.
A temperature rise is normal per new NEMA specifications.
If additional wire runs are added to any junction box or control panel, wiring practice should be such as
to maintain prevailing electrical hazard classification.
High-pressure air systems are dangerous. Do not service or troubleshoot systems with air supply on. Be
sure to bleed off any trapped air before working on components since it is possible to have high
pressures trapped in airlines and cylinders, etc.
Keep fingers, hands, feet, etc. out of path of pneumatically operated components.
Safety glasses should be worn in equipment area.
Follow the safety regulations for your plant. ALWAYS USE GOOD JUDGEMENT!
To Next Page
Loading...
