CD Automation CD3000 E-3PH - Unit Identification and Order Code; Unit Identification Label

CD Automation srl CD3000E-3PH from 25A to 500A User’s Manual
12
5 Identification and Order Code
5.1 Identification of the unit
Caution: Before to install, make sure that the Thyristor unit have not damages. If the
product has a fault, please contact the dealer from which you purchased the product.
The identification's label give all the information regarding the factory settings of the Thyristor unit, this
label is on the unit, like represented in figure.
Verify that the product is the same thing as ordered (see par. 5.2).