CD Concept CD400 - Digital SE5000

Tachograph programmer CD400 - User manual – V2.00 r07 (9/01/2014) index
3.2.7. Digital SE5000
DIGITAL
SE5000
1.Measure W
1.Manual
2.Photo sensor
2.Parameters
1.Calibration
1.W factor
2.K factor
3.L (Tyre Circ.)
4.Tyre Size
5.Max.Auth.Speed
6.Odometer
7.Time & Date
8.Next Cal. Date
9.Veh.Reg.Nation
10.Veh.Reg.Number
11.Veh.Id.Number
12.O/P shaft
2.Other param.
1.ResetHeartbeat
2.TCO1 priority
3.O/P shaft
4.CAN rep.rate
5.Part number
3.Manufacturer
1.Part number
2.CanBus activat
3.Speed Corr.
4.D6
5.D4
6.Light input
7.RPM input
8.Default lang.
9.Serial Output
10.D1D2 Record
11.RPM Record
12.Speed Record
13.Kn factor
14.Install.date
15.IMS Source
16.IMS Gain
17.IMS Factor
4.Information
1.Supplier Id
2.Manufact. Date
3.Serial number
4.Hardware number
5.Hardware vers.
6.Software number
7.Software vers.
8.License number
3.Speed test
1.Manual
2.Automatic
4.Odometer test
5.Read DTCS
6.Erase DTCS
7.Sensor
pairing
8.Clock test
9.PIN code
10.Select
Tacho.
11.Product
info.
12.Language.
Page 11 sur 23