CD Concept CD400 - Digital ACTIA

Tachograph programmer CD400 - User manual – V2.00 r07 (9/01/2014) index
3.2.8. Digital ACTIA
DIGITAL ACTIA
1.Measure W
1.Manual
2.Photo sensor
2.Parameters
1.Calibration
1.W factor
2.K factor
3.L (Tyre Circ.)
4.Tyre Size
5.Max.Auth.Speed
6.Odometer
7.Time & Date
8.Next Cal. Date
9.Veh.Reg.Nation
10.Veh.Reg.Number
11.Veh.Id.Number
12.O/P shaft
2.Other param.
1.ResetHeartbeat
2.TCO1 priority
3.O/P shaft
4.CAN rep.rate
5.Part number
3.Specific
1.Default Lang
2.Card Language
3.Backlight conf.
4.Drv1 ign.ON
5.Drv2 ign.ON
6.Drv1 ign.OFF
7.Drv2 ign.OFF
8.Install. date
4.Information
1.Supplier Id
2.Manufact. Date
3.Serial number
4.Hardware number
5.Hardware vers.
6.Software number
7.Software vers.
8.License number
3.Speed test
1.Manual
2.Automatic
4.Odometer test
5.Read DTCS
6.Erase DTCS
7.Sensor pairing
8.Clock test
9.PIN code
10.Select Tacho.
11.Product info.
12.Language.
Page 12 sur 23