CD Concept CD400 - Sensor Pairing (Kitas activation); Clock Test

Tachograph programmer CD400 - User manual – V2.00 r07 (9/01/2014) index
Erase DTCs
erased
successfully
4.6. Read DTCs
The function "Read DTCs" is used to read the "Diagnostic Trouble Codes" (DTC) stored in the error memory of
the tachograph.
It is available for the following tachographs:
- Digital tachographs (DTCO1381, SE5000, SmarTach & EFAS)
DTCs number is the error number available in memory
Error code
Full error description
Use the '↑' and '↓' keys to select next or previous error.
Press 'Esc' to go back to main menu.
4.7. Erase DTCs
The function "Erase DTCs" is used to erase the "Diagnostic Trouble Codes" (DTC) stored in the
error memory of the tachograph.
It is available for the following tachographs:
- MTCO 1324/1390
- VR2400
- Digital tachographs (DTCO1381, SE5000, SmarTach & EFAS)
The following message is displayed after erasing the error memory.
Press 'Esc' to go back to main menu.
DTCs number:03
01: 002452 (2F)
SensorTachograph
SignatureMismatch23
Page 20 sur 23