CD Concept CD400 - PIN Code Management

Tachograph programmer CD400 - User manual – V2.00 r07 (9/01/2014) index
4.8. Sensor Pairing (Kitas activation)
This function is available for the following tachographs:
- MTCO 1324/1390
- VR2400
- Digital tachographs (DTCO1381, SE5000, SmarTach & EFAS)
Sensor pairing is executed automatically after modifying any calibration parameter on digital tachographs.
A progress bar indicates the status of KITAS
activation.
Kistas sensor is activated with success.
No response received from KITAS.
4.9. Clock test
The clock test function will check the accuracy of the clock of the tachograph.
For the K1314, the K1318 and the k1319, an external clock sensor has to be used.
The measure is updated every second.
The result represents the clock deviation in seconds/day.
Press 'Esc' to go back to main menu.
Sensor pairing
Sensor pairing
>
Successfull
OK
Sensor pairing
>
ERROR!
OK
Clock test
000 s/day
Page 21 sur 23