HI-PE multi-zone --- Rev. FI 050 GB 60K10 v2_1
4
CONTENTS
INSTALLATION, USE AND SAFETY INFORMATION 2
SYMBOLS 3
WARRANTY CONDITIONS 3
CONTENTS 4
I - DESCRIPTION 5
OPERATING PRINCIPLE 5
Models 6
CONSTRUCTION OF THE METAL DETECTOR 6
Electronics Unit 6
Archway 7
Standard Model 7
Mains adapter 7
OPTIONS 8
Transit counter 8
Emergency batteries 8
II - INSTALLATION 9
ASSEMBLY 9
Unpacking the Metal Detector 9
Mechanical assembly 9
Assembly of the probe 9
Fixing the electronics unit 10
Positioning 11
Fixing the antenna to the ground 11
Electrical assembly 12
Connecting the electronics unit to the archway
(antenna). 12
Power supply connection 12
Outdoor model for outdoor applications:
assembly 13
Examples of Installations 14
Application in an airport environment 14
Transit flow-rate and secondary metal
detector for inspection in case of alarm 16
Installation of coupled metal detectors -
synchronisation 17
III - SWITCHING ON AND DISPLAY MESSAGES 18
SWITCHING ON THE METAL DETECTOR 18
DISPLAY MESSAGES 18
Alarm indications 18
Other messages 19
Messages activated via the keypad 19
VISUAL ALARM ZONE INDICATION 20
STAND-BY 21
IV - PROGRAMMING 22
LOCAL PROGRAMMING 22
COMMAND EXECUTION - LOCAL PROGRAMMING 22
Time out 23
DESCRIPTION OF THE COMMANDS 23
Reception Parameters 23
Transmission parameters 24
Alarm signal parameters 24
Management of the Metal Detector 24
ANALYSIS PROGRAMS AVAILABLE WITH
THE COMMAND "IS" 27
INSTALLATION CHECKS 28
ADVANCED PROGRAMMING - REMOTE PROGRAMMING 30
Serial communication 30
Communication system configuration 31
Free access to programming phase (without
password) 31
Execution of commands in remote programming 31
SIMULTANEOUS ACCESS REQUEST BY REMOTE AND
LOCAL PROGRAMMING
31
ADVANCED PROGRAMMING: USE OF THE
PASSWORD
32
Programming levels 32
Password definition 32
Access to the programming phase using the
password 33
Programming without password 33
Parameters accessible from remote
programming only 34
V - TECHNICAL CHARACTERISTICS 35
VI - MAINTENANCE 36
SUGGESTED MAINTENANCE SCHEDULE 36
DIAGNOSIS 37
TROUBLESHOOTING 38
COMPATIBILITY ASPECTS 39
PROCEDURES 40
Autotest program 40
ALP card: trouble-shooting diagram 40
Battery replacement procedure 41
VII - APPENDICES 42
DECLARATION OF CE CONFORMITY 42
ELECTRICAL CONNECTIONS 43
ACCESSORIES 44
MAIN & BATTERY SUPPLY UNIT 44
Personal Effects Depository 44
SPARE PARTS 45
To Next Page
Loading...
