Ceia PD240CH - 2.5.1 Pin-Pointing Localization and 2.5.2 Alarm Reset

8 Use
FI100K0025v1100 UK - - PD240CH
When a metal mass is detected, the alarm indicator provides a RED signal proportional to
the size (small/medium/large) or the distance of the object.
A dual-tone audio indication is also provided. The center of the target corresponds to the
tonal change.
No metal mass
Small metal mass
TONE A
TONE B
Medium metal mass
Large metal mass
2.5.1 Two-step localization procedure (Pin-Pointing)
When the device detects a target, the change of the alarm tone indicates the centerline of
an area where it is probably located.
To obtain a more precise localization, sweep with crossed axis in order to determine the
center point of the target.
T
O
N
E
A
T
O
N
E
B
T
O
N
E
A
T
O
N
E
B
2.5.2 Alarm Reset
The detector can trigger an alarm when placed near to a large size metal mass.
In this case, move away the detector from the metal mass: the alarm will reset
automatically. A prolonged alarm can be quickly reset, by pressing the ON/OFF button
briefly.
Do not reset the detector when placed near to a large size metal mass!
i
The optical
alarm signal is
always enabled,
except for
specific
customer‘s
request.