Use 7
FI100K0025v1100 UK - - PD240CH
2.5 Metal mass detection
Scan the person’s body sweeping slowly the detector
(max. speed: 50cm/second) close to the surface to
inspect (distance: approximately 1 cm).
Move the detector gently and do not bump it against
the person, in order to prevent harm to the patient.
If necessary, change the Analysis Mode to scan
properly each part of the person’s body. Each
Analysis Mode is optimized for a specific aspect, but
its use can be valued depending on the specific
needs.
Keep the detector far from metal masses:
ground : minimum distance of 40 cm
large size metal objects, such as furniture, metal frames, walls and doors:
minimum distance of 50cm.
For this purpose, the person to scan should be lying on a metal free support. The figure
below shows an example of a gurney mainly made of plastic: the shaded area is metal
free, while the castors can contain metallic parts.
To Next Page
Loading...
