41
5. Press the right ARROW key 3 times. The following screen will appear.
6. Use the “+/-” keys to highlight “APM Cleaning.”
7. Press the ENTER key. A new screen will appear.
8. Remove the attenuator from the cavity.
9. Press the ENTER key. A new screen will appear.
“Clean APM” - Moves the APM forward and lowers the pressure head.
“APM Home” - Raises the pressure head and homes the APM.
10. Use the “+/-” keys to highlight “Clean APM.”
11. Press the ENTER key. The pressure device will move forward.
To Next Page
Loading...
