12
1.5 Select the text box for Max Temp to display the keypad.
1.6 Enter the maximum temperature to be used for the solvent and select the “Enter.”
1.7 Select the text box for Cooling Temp to display the keypad.
1.8 Enter the temperature at which another extraction can occur for the solvent and select
“Enter.”
NOTE
The Max Temp is the maximum temperature the system will heat the solvent and the Cooling
Temp is the maximum temperature at which the system will start another run using the
solvent.
1.9 Select “OK.”
To Next Page
Loading...
Need help?
General
