CEM MARS 6 Synthesis - Edit Method; Delete Method

22
Methods
Create a One Touch Method
Contact CEM Corporation before creating One Touch Methods.
Edit Method
When a method is edited and saved, the original method and run data are no longer available.
1. Select and hold (long touch) the method to be edited.
2. Select the Edit icon at the top of the screen.
3. Edit the desired parameters.
NOTE
See “Create Method” for specic details regarding method parameters and stages.
4. Select the Save icon.
Delete Method
The original method and run data are no longer available when a method is deleted.
1. Select and hold (long touch) the method to be deleted.
NOTE
Multiple methods can be deleted at a time by highlighting multi select.
2. Select the Delete icon.