66
Appendix B: EasyPrep and EasyPrep Plus Vessels
Sleeves
1. If water or solvent gets on a sleeve, wipe it off with a damp paper towel and allow to dry. Never soak sleeves.
CAUTION
Never soak sleeves in water or detergent.
Remove composite sleeves before adding solvent to vessel liners or before pouring solutions out to
prevent liquid from wicking into the composite material.
Turntable, Frame, Load Disc, & Screw
1. Wash in hot, soapy water as needed and allow to dry completely before use.
To Next Page
Loading...