To Next Page

To Previous Page

4 Puddle and Cover

5 Swirl or Zig-Zag Pattern, No Cover

Standard application used for heat sensitive samples if sample burns when using

the puddle and spread technique.

If the sample is a water-based liquid or solvent-based chemical, use a pipette to

puddle the sample onto the pad(s). Cover the sample with an additional pad. A

sufficient number of pads should be used to ensure that liquid samples do not drip

onto the floor of the instrument cavity.

Questions and Answers:

Need help?

Do you have a question about the CEM SMART System 5 and is the answer not in the manual?

CEM SMART System 5 Specifications

General