CEM SMART System 5 - Calibration

127
48. Lift the instrument cover. Place either a 10
gram or 50 gram weight. Close the
instrument cover.
Note: Press any key to abort the balance
calibration.
Note: Wait for the instrument to calibrate the
balance with the applicable weight.
49. Remove the calibration weight from the
balance pan.
50. Press any key to return to the Setup screen.
51. Press “8” to activate the Security screen.
Setup
1. SYSTEM OPTIONS
2. SYSTEM INFORMATION
3. PRINTER
4. COM PORT
5. CONTRAST
6. CLOCK
7. CALIBRATION
8. SECURITY
Press item number to select.
NEXT
PAGE
Calibrate Balance
Add 10g or 50g and press READY.
ABORT
Wait . . .
Calibrate Balance
Calibration Complete.
Remove calibration weight.
Press any key to continue.