CEM SMART System 5 User Manual

39
As the analysis begins, the flashing microwave
indicators in the balance icon appear and the
time begins counting down. The sample weight
decreases as the moisture is removed.
During the drying time, the operation key below
SOLIDS or MOISTURE may be pressed to
display % solids or % moisture.
Note: Press the operation key below STOP
TEST to stop the method test.
When the drying time is complete, five short
beeps will be heard, and the Data Results screen
will appear, displaying either the % moisture or
% solids as selected.
Note: Press READY to analyze additional
samples using the same method.
Note: Press the operation key below FORM
FEED to advance blank paper from the internal
printer.
28. Press the operation key below DATA to
display the analysis data.
29. Press the operation key below SAMPLE
WEIGHTS to view sample weight
information.
Data Results
Sample ID: xxxxxx
Dry Time: xx:xx
Moisture: xx.xx%
Solids: xx.xx%
Press READY to continue.
MAIN FORM SAMPLE
MENU FEED WEIGHTS PRINT
QUICK TEST
Sample ID: xxxxxx
Power: xxx%
Temp (xxx): xx.x
Time: xx:xx
Solids: xx.xx%
Wt: x.xxxxg
STOP
SOLIDS TEST
Data Results
XX.XX%M
Press READY to continue.
MAIN FORM
MENU FEED DATA PRINT
QUICK TEST
Sample ID: xxxxxx
Power: xxx%
Temp (xxx): xx.x
Time: xx:xx
Moisture: xx.xx%
Wt: x.xxxxg
STOP
SOLIDS TEST

CEM SMART System 5 Specifications

General

Brand	CEM
Model	SMART System 5
Category	Measuring Instruments
Language	English