CENTURION SYSTEMS VANTAGE 400 SMART - Page 4

page 4 www.centsys.com
8. ELECTRICAL SETUP
8.1. Secure Vx SMART Wallbox to the Wall
8.2. Wiring
8.2.1. Wiring Diagram Symbols
8.2.2. Wiring the Master Operator
8.2.3. Wiring the Slave Operator
8.2.4. Wired Closing Safety Baems (i5)
8.2.5. Double Wired Closing Safety Beams (i5)
8.2.6. Wired Opening Safety Beams (i5)
8.2.7. Wired Opening Safey Beams (PHOTON)
8.2.8. Double Wired Closing Safety Beams (PHOTON)
8.2.9. Wired Opening Safety Beams (PHOTON)
8.2.10. PHOTON SMART Wireless Beams
8.2.11. GLX900 Electronic Lock
8.2.12. Wiring for MagLock to Vx SMART Controller
8.2.13. Status LED
8.2.14. External Radio Receiver & Loop Detector
8.2.15. Holiday Lockout Keyswitch / Keypad
8.2.16. Pedestrian Keyswitch
8.2.17. G-ULTRA to Vx SMART Controller
8.2.18. Solar Panel
8.2.19. Pillar Light Pushbutton - Normally Open
8.2.20. Pillar Light Wiring
8.3. Fuse Protection
8.4. Commissioning the System
9. INSTALLATION HANDOVER
10. WARRANTY INFORMATION
Page 35
Page 35
Page 36
Page 37
Page 38
Page 38
Page 39
Page 39
Page 40
Page 40
Page 41
Page 41
Page 42
Page 42
Page 43
Page 44
Page 44
Page 45
Page 45
Page 46
Page 46
Page 47
Page 47
Page 48
Page 48
Page 49
Page 50
CONTENTS
Icons used in this manual
This icon indicates tips and other information that could be useful during the
installation.
This icon denotes variations and other aspects that should be considered during
installation.
This icon indicates warning, caution or attention! Please take special note of
critical aspects that MUST be adhered to in order to prevent injury.