EasyManua.ls Logo

Cessna 172S Nav III - Comprehensive Equipment List

Cessna 172S Nav III
422 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CESSNA
MODEL 172S NAV
III
SECTION 6
WEIGHT AND BALANCE/EQUIPMENT LIST
COMPREHENSIVE EQUIPMENT LIST
Figure
6-9
is a comprehensive list of all Cessna equipment which is available I
for
the
Model
1725 airplane equipped with Garmin
Gl000
Integrated Cockpit
System (Serials 17289810
and
On). This comprehensive equipment list provides
the
following information
in
column
form:
In
the ITEM NO column,
each
item is assigned a coded number.
The
first
two
digits of the code represent
the
identification of
the
item
within Air
Transport Association Specification
100
(11
for Paint
and
Placards;
24
for
Electrical
Power;
77
for Engine Indicating, etc.). These assignments also
correspond to
the
Maintenance Manual chapter for
the
airplane. After the
first two
digits, items receive a unique sequence number
(01,
02,
03,
etc.).
After
the
sequence number, a suffix letter is assigned
to
identify equipment
as a required item, a standard item or
an
optional item.
Suffix letters are as follows:
R=
Required items or equipment for
FAA
certification
(14
CFR
Part
23
or Part
91).
S=
Standard equipment items.
0=
Optional equipment items replacing required
or
standard items.
A=
Optional equipment items which
are
in
addition
to
required or
standard items.
In
the
EQUIPMENT LIST DESCRIPTION column,
each
item
is assigned a
descriptive name to help identify its function.
In
the REF DRAWING column, a Cessna drawing number
is
provided which
corresponds to the item.
NOTE
If
additional equipment
is
to
be
installed, it must
be
done
in
accordance
with
the reference drawing, service bulletin or a
separate
FM
approval.
In
the
WT
LBS and
ARM
INS columns, information is provided
on
the
weight
(in
pounds)
and
arm
(in
inches) of
the
equipment item.
NOTE
•
Unless otherwise indicated, true values (not net change
values) for
the
weight
and
arm
are
shown. Positive arms
are distances aft of
the
airplane datum; negative arms
are
distances forward of
the
datum .
• Asterisks
(*)
in
the weight
and
arm
column indicate
complete assembly installations.
Some
major components
of
the
assembly
are
listed
on
the lines immediately
following.
The
sum
of these major components does not
necessarily equal the complete assembly installation.
172SPHAUS-01
U.S.
6-17

Table of Contents