CET PMC-340 - Chapter 2 Installation Guide; 2.1 Meter Appearance and Components; 2.2 Unit Dimensions

CET Inc.
12
Chapter 2 Installation
2.1 Appearance
Figure 2-1 Appearance
2.2 Unit Dimensions
Front View Side View
Figure 2-2 Dimensions
Caution
Installation of the PMC-340 should only be performed by qualified, competent personnel
that have the appropriate training and experience with high voltage and current devices.
The meter must be installed in accordance with all local and national electrical codes.
During the operation of the meter, hazardous voltages are present at the input terminals.
Failure to observe precautions can result in serious or even fatal injury and equipment
damage.