CH P1 - Page 24

P1 SETUP >> AUDIO SETTINGS menu items
(1) Menu title. P1 SETUP >> AUDIO SETTINGS shows that the parent menu is P1 SETUP. By pushing the CANCEL [Q] button, the unit returns to the
parent menu.
(2) This is the Parameter Value column. For each item in the Parameter column, the Parameter Value item on the same line indicates the current
value of the Parameter.
(3) This is the Parameter column. The currently active Parameter is highlighted. Use the UP [N] and DOWN [O] buttons to navigate from
Parameter to Parameter, and the OK [R] button to enter the edition mode of that parameter.
Once a terminal Parameter (e.g. a Parameter not giving access to a further sub-menu) is selected by pushing the OK [R] button,
the P1 displays the corresponding Parameter adjustment screen. Following example shows the AUDIO SETTING >> EQUALIZATION
CURVE Parameter adjustment screen. Other Parameters are similar but may show more (or less) choices for the Parameter value.
Once a Parameter is set to the desired value, an OK [R] button push saves the new Parameter Value and gets back to the parent
level (save and exit). On the other hand, a CANCEL [Q] button push gets back to the parent menu (in the case of this example:
AUDIO SETTING), but possible modifications of the Parameter Value are discarded (exit without saving).
AUDIO SETTINGS >> EQUALIZATION CURVE menu items
24 P1 User Manual Rev 1.1