Recommended:
Mounting Options
Mounting locations vary depending on type and style of your gate.
NOTES:
• The bottom of operator must be mounted at least 4" (10 cm) up from ground. Environmental conditions should be
considered at this time.
• Not recommended for plastic or vinyl gates. Refer to gate manufacturer for recommendation and options.
= Gate post bracket mounting locations
= Gate bracket mount locations
LEFT-HAND HINGE MOUNTED
RIGHT-HAND HINGE MOUNTED
9 Preparation and Overview
Typical Tubular Metal Gate
Typical Tubular Metal Gate
Typical Wood Gate
Typical Wood Gate
Typical Farm/Ranch Gate
Typical Farm/Ranch Gate
Typical Chain Link Gate
Typical Chain Link Gate
To Next Page
Loading...
