18
Supervisor Mode
SUPERVISOR MODE - continued
DRAIN
• Press the DRAIN button to test drain valve function.
• The PW DRAIN and WASH DRAIN button turn read when pressed.
• The valves open when pressed and close when the button is released.
SETUP OPTIONS
Fig. 35 - Drain Test
• The SETUP OPTIONS menu gives the supervisor access to several machine settings.
• Press setup options button. An enter password screen appears.
• Press the zero on the screen to access a keypad. Press EXIT to return to previous screen.
• Enter 7777 and ENT to advance to the MACHINE SETTINGS menu.
Fig. 36 - Setup options -Machine Settings
The Supervisor Mode will time out in 5 minutes if left idle. The 7777 password must
be re-entered to continue with settings.
To Next Page
