CHCNAV i70+ - Connecting to a Controller; Connecting Via Wi-Fi with Landstar 7 Software

Getting started with i70+
19
2.7 Connecting to a controller
2.7.1 Connecting via Wi-Fi with LandStar 7 software
Turn on the controller → run LandStar 7 → go to Config main menu → tap Connect.
In the Connect screen, select CHC for the Manufacture field, i70+ for Device Type
field, WIFI for Connection Type field,
Tap the Wireless Lan icon on the right side to select the hot-spot → Switch on the
WiFi module by the top switch → tap refresh button to search the hot spot around →
select the target device in the list.