CHCNAV i70+ - Configure the Working Mode

Front Panel Operation
29
Language English
 Click Enter button to change
the display language
between Chinese, English
and Russian.
Cancel
 Click Enter button to back to
the top-level menu.
3.2 Configure the working mode
7 working modes are provided for quickly setting up a RTK base station or rover
station. Users can configure each working mode through front panel as follows:
Working Mode
Menus in Configuration
Screen
Description
Base Cable
 Set up the receiver as a base
station using external UHF.
 Click Enter button to enter the
configuration screen.
Mode Base Cable
 The title of this configuration
screen.
Format CMR
 Click Enter button to change
the correction format.
 The available correction
formats are: CMR, CMR+,
RTCM v2.3, RTCM v3.0, and
RTCM v3.2.
OK
 Click Enter button to save the
settings and back to the
top-level menu, and then this
working mode will take effect.
Cancel
 Click Enter button to cancel
the settings and back to the