CHCNAV i70+ - Page 30

Front Panel Operation
30
second-level menu.
Base Int. UHF
 Set up the receiver as a base
station using internal UHF.
 Click Enter button to enter the
configuration screen.
Mode Base Int. UHF
 The title of this configuration
screen.
Channel 1
 Click Enter button to change
the channel from 1 to 9.
-
Format CMR
 Click Enter button to change
the correction format.
 The available correction
formats are: CMR, CMR+,
RTCM v2.3, RTCM v3.0, and
RTCM v3.2.
Power 2w
 Click Enter button to change
the transmitting power.
 The available transmitting
power options are: 0.1w,
0.5w, 1w and 2w.
Protocol CHC
 Indicates the current protocol.
OK
 Click Enter button to save the
settings and back to the
top-level menu, and then this
working mode will take effect.
Cancel
 Click Enter button to cancel
the settings and back to the
second-level menu.
Base APIS
 Set up the receiver as a base
station using APIS service.