CHCNAV i89 GNSS - Connecting to a Controller; Connecting Via Wi-Fi with Landstar 8 Software

Getting Started with i93
CHCNAV i93 GNSS USER GUIDE | 2023-04 P a g e | 18
2.6 Connecting to a Controller
2.6.1 Connecting via Wi-Fi with LandStar 8 Software
Turn on the controller → run LandStar 8 → go to Config main menu → tap Connect.
In the Connect screen, select CHC for the Manufacture field, i93 for Device Type field, WIFI for
Connection Type field.
Tap the Wireless Lan icon on the right side to select the hot spot → Switch on the WiFi module
by the top switch → select the target device in the list.
Tap Connect to link to the hot spot. If the first-time connection to this hot spot, user may type
in the password.