CHCNAV i89 GNSS - Data Recording and FTP Push

Equipment Setup and Operation
CHCNAV i93 GNSS USER GUIDE | 2023-04 P a g e | 57
4.4 Data Recording Menu
Use the Data Logging menu to set up the receiver to log static GNSS data
and to view the logging settings. You can configure settings such as observable
rate, recording rate, continuous logging limit, and whether to auto delete old
files when memory is low. This menu also provides the controls for the FTP
push feature:
4.4.1 Log Settings Submenu
Here shows the data logging status, including internal and external storage usage and data
logging status of each session. Also, users can configure the data logging settings for each session,
including recording name, store location, storage limit, store formats, start time, etc