Check Point R80.20 - Cpconfig

Command Line Reference
Next Generation Security Gateway Guide R80.20 | 331
cpconfig
Description
This command starts the Check Point Configuration Tool. This tool lets you configure specific
settings for the installed Check Point products.
Important - In cluster, you must configure all the Cluster Members in the same way.
Syntax
cpconfig
Menu Options
Note - The options shown depend on the configuration and installed products.
Menu Option
Description
Licenses and contracts Manages Check Point licenses and contracts.
SNMP Extension Do not use this option anymore.
To configure SNMP, see the
R80.20 Gaia
Administration Guide
https://sc1.checkpoint.com/documents/R80.20_GA/
WebAdminGuides/EN/CP_R80.20_Gaia_AdminGuide/
html_frameset.htm - Chapter
System Management -
Section
SNMP .
PKCS#11 Token Register a cryptographic token, for use by Gaia OS.
See details of the token, and test its functionality.
Random Pool Configures the RSA keys, to be used by Gaia OS.
Secure Internal Communication Manages SIC on the Security Gateway.
This change requires a restart of Check Point
services on the Security Gateway.
For more information, see the
R80.20 Security
Management Administration Guide
https://sc1.checkpoint.com/documents/R80.20_GA/
WebAdminGuides/EN/CP_R80.20_SecurityManagem
ent_AdminGuide/html_frameset.htm.
Enable cluster membership for this
gateway
Enables and disables the cluster membership on the
Security Gateway.
This change requires a reboot of the Security
Gateway.