Check Point R80.20 - Cpwd_Admin Detach

Command Line Reference
Next Generation Security Gateway Guide R80.20 | 366
cpwd_admin detach
Description
Temporarily detaches a monitored process from the WatchDog monitoring.
Notes:
• WatchDog stops monitoring the detached process, but the process stays alive.
• The cpwd_admin list command does not show the detached process anymore.
• This change applies until all Check Point services restart during boot, or with the cpstart
command.
Syntax
cpwd_admin detach -name <Application Name> [-ctx <VSID>]
Parameters
Parameter Description
< Application Name >
Name of the monitored Check Point process as you see in the output
of the cpwd_admin list command in the leftmost column APP.
Examples:
• FWM
• FWD
• CPD
•
CPM
-ctx < VSID >
On VSX Gateway, specifies the context of the applicable Virtual
System.
Example
[Expert@HostName:0]# cpwd_admin detach -name FWD
cpwd_admin:
successful Detach operation
[Expert@HostName:0]#