Check Point R80.20 - Cplic Check

Command Line Reference
Next Generation Security Gateway Guide R80.20 | 337
cplic check
Description
Confirms that the license includes the feature on the local Security Gateway or Security
Management Server. See sk66245 http://supportcontent.checkpoint.com/solutions?id=sk66245.
Syntax
cplic check {-h | -help}
cplic [-d] check [-p <Product>] [-v <Version>] [{-c | -count}] [-t <Date>] [{-r
| -routers}] [{-S | -SRusers}] <
Feature
>
Parameters
Parameter Description
{-h | -help}
Shows the applicable built-in usage.
-d
Runs the command in debug mode.
Use only if you troubleshoot the command itself.
-p < Product >
Product, for which license information is requested.
Some examples of products:
• fw1 - FireWall-1 infrastructure on Security Gateway (all blades),
or Management Server (all blades)
• mgmt - Multi-Domain Server infrastructure
• services - Entitlement for various services
• cvpn - Mobile Access
• etm - QoS (FloodGate-1)
•
eps
- Endpoint Software Blades on Management Server
-v <
Version
>
Product version, for which license information is requested.
{-c | -count}
Outputs the number of licenses connected to this feature.
-t < Date >
Checks license status on future date.
Use the format ddmmyyyy.
A feature can be valid on a given date on one license, but invalid on
another.
{-r | -routers}
Checks how many routers are allowed.
The
<
Feature
>
option is not needed.
{-S | -SRusers}
Checks how many SecuRemote users are allowed.
<
Feature
>
Feature, for which license information is requested.
Example from a Management Server
[Expert@MGMT]# cplic print -p
Host Expiration Primitive-Features
W.X.Y.Z 24Mar2016 ::CK-XXXXXXXXXXXX fw1:6.0:swb fw1:6.0:comp
fw1:6.0:compunlimited fw1:6.0:cluster-1 fw1:6.0:cpxmgmt_qos_u_sites