Check Point R80.20 - Page 77

ICAP Client
Next Generation Security Gateway Guide R80.20 | 77
To add an HTTP server status code temporarily
1.
Set the value of this kernel parameter to the desired string (see the Notes above):
• # fw ctl set str icap_append_status_code_str 'N'
• # fw ctl set str icap_append_status_code_str 'NN'
• # fw ctl set str icap_append_status_code_str 'NNN'
2.
Print the list of the configured server status codes:
# fw ctl set str icap_append_status_code_str '__print__'
# dmesg | grep icap_client_append_status_code
Example:
[Expert@GW:0]# fw ctl set str icap_append_status_code_str '3'
[Expert@GW:0]# fw ctl set str icap_append_status_code_str '__print__'
[Expert@GW:0]# dmesg | grep icap_client_append_status_code
[fw6_0];icap_client_append_status_code: ==> new 'status code' array is: [
1 ; 2 ; 3 ;]
[fw4_0];icap_client_append_status_code: ==> new 'status code' array is: [
1 ; 2 ; 3 ;]
[Expert@GW:0]#
To delete all configured HTTP server status codes temporarily
1.
Set the value of this kernel parameter to an empty string '':
# fw ctl set str icap_append_status_code_str ''
2.
Print the list of the configured HTTP headers:
# fw ctl set str icap_append_status_code_str '__print__'
# dmesg | grep icap_client_append_status_code
Example:
[Expert@GW:0]# fw ctl set str icap_append_status_code_str ''
[Expert@GW:0]# fw ctl set str icap_append_status_code_str '__print__'
[Expert@GW:0]# dmesg | grep icap_client_append_status_code
[Expert@GW:0]#
To restore the default configured HTTP server status codes temporarily
1.
Set the value of this kernel parameter to the strings '1' and '2':
a) # fw ctl set str icap_append_status_code_str '1'
b) # fw ctl set str icap_append_status_code_str '2'
2.
Print the list of the configured server status codes:
# fw ctl set str icap_append_status_code_str '__print__'
# dmesg | grep icap_client_append_status_code