Check Point R80.20 - Page 98

Hardware Security Module (HSM)
Next Generation Security Gateway Guide R80.20 | 98
To get HSM partition access status description, query this SNMP object:
SNMP OID
Returned strings
Explanation
hsmStatus.hsmPartitionAccess
Description
.1.3.6.1.4.1.2620.1.54.3.4
HSM partition
access cannot
be checked
Security Gateway could not check
access its partition on HSM Appliance
Server.
Most probably, because HSM
configuration is disabled on Security
Gateway.
Gateway can
access HSM
partition for
HTTPS
inspection
Security Gateway was able to access
its partition on HSM Appliance Server.
Gateway cannot
access HSM
partition for
HTTPS
inspection:
<error>
Possible errors
are:
• HSM
configurati
on file is
corrupted
•
Loading HSM
library
failed
•
There is no
trust or no
connectivit
y with HSM
server
• Login to HSM
partition
failed
Security Gateway was not able to
access its partition on HSM Appliance
Server due to an error.
To get Outbound HTTPS Inspection status, query this SNMP object:
SNMP OID
Returned strings
Explanation
hsmStatus.outboundStatus
.1.3.6.1.4.1.2620.1.54.3.5
HSM on
All these conditions were met:
1. The value of the :enabled()
attribute is set to "yes" in the
$FWDIR/conf/hsm_configuratio
n.C file on Security Gateway.
2. Security Gateway was able to
connect to the HSM Appliance Server.